Description
Burr Oak FP3 Fin Die
REF. DIES: FDM-1299-2
TYPE
DIE TYPE: Draw PATTERN: 3/8 X 1.000 X .866 Staggered
STYLE: Ribbon
FEED PROGRESSION: 4.000
SIZE: 48 Rows X 4 Holes Per Row Per Progression
FIN STOCK
MAT’L: Aluminum ALLOY: 1100 TEMPER: O
THICKNESS RANGE: .004 – .006
FIN STOCK LUBRICANT: Oak 50-5
COLLAR
INNER DIAMETER: .387 þ.001 COLLAR BASE: Raised
DRAW & FORM
DRAW RANGE: 24 – 10 F.P.I. NUMBER OF DRAWS: 4
ADJUSTMENT: Wedge Slide
STRIPPING: Air and Springs
FIRST DRAW: Combined Push Pin/Pressure Pad Type
FORM PLATES: Plain
PIERCE & EXTRUDE
STYLE: Combined Pierce-Extrude STATION TYPE: Sub-Die
ENHANCE
FIN TYPE: Special Louvers On Flat Surface
TOOL TYPE: One Stage With Stripper Plates
SUB-DIE TYPE: Fixed With Removable Comb Type Spacer Plates
THRU-THE-ENHANCEMENT LUBE: Yes
REFLARE
ADJUSTMENT: Wedge Slide
STRIPPING: Upper Plate Stripper
ANVIL TYPE: Individually Adjustable By Rows
EDGE TRIM
BLADES: Rippled
SLIT
BLADES: Rippled
TYPE: Slotted Style Quick Set
SELECTOR PLATE: 1 – 4 & 6 Row Fins
FEED
FEED COVER TRAY: Fixed With Milled Clearance For Collars
CUT-OFF
TYPE: Gag Bar With Gag Rod
CUT: Straight
BLADES: Plain
MISCELLANEOUS
FEED LINKS: For FP-3 Press
THRU-THE-PIERCE AUTO LUB
SPECIAL FEATURES: EXTRA TAPPED HOLES TO BE INSTALLED IN THE PUNCH HOLDER FOR THE SPECIAL DIE LIFTING BRACKET SUPPLIED WITH THE EARLIER
DIES. AIR OPERATED LACING PILOTS REQUIRED IN THE PIERCE STATION. TITANIUM MOVING FEED BAR REQUIRED.
PROVIDE BROKEN SCREW DETECTOR FOR LOUVER STATION STRIPPER RAIL. ESSENTIALLY A REPEAT OF FDM-975 SERIES DIE EXCEPT ADD SUB-DIE PIERCE AND ADJUSTABLE REFLARE ANVILS. MAINTAIN PRESS MOUNTING COMPATABILITY WITH FDM-975 SERIES DIES.
SPARE TOOLING: None Req’d.
